High Current Two Channel Amplifier
All pre-owned product is tested in our service department and have been passed for sale... and comes with a 90 day warranty.
In good condition. Some small scratches and smudges. Original box and packing are NOT included, but we will pack carefully. We are an authorized Rotel dealer.
Circa 2004-08. From Rotel: The latest interpretation of a classic Rotel awardwinning power amplifier, the RB-1070 continues the tradition of oversized toroidal transformer and high capacity power supply. In addition, Symmetrical Signal Trace circuit topology assures the precise interchannel timing clues necessary for pinpoint stereo reproduction. At 130 watts per channel, the RB-1070 is more than capable of meeting the challenges of even the least efficient loudspeakers. An internal bridge option provides truly prodigious 330 watt output capability.
Front panel LED status indicators show power, protection, and bridged mode for instant system analysis. A separate input and output for 12 volt “trigger” signals and detachable AC cord increase this amplifier’s flexibility by allowing total integration with even the most complex remote-controlled systems.
Power Configurations: 2 x 130 watts
Continuous Power Output (20-20 kHz, < 0.03%) : 130 watts/ch into 8 ohms
Bridged Mono Power Output (20-20 kHz, < 0.1%): 330 watts/ch into 4 ohms
THD (20-20,000Hz)
cont. rated power : 0.03%, maximum
one-half rated power: 0.03%, maximum
one watt per channel: 0.03%, maximum
IM Distortion (at rated ower, 60Hz:7kHz = 4:1): 0.03%, maximum
Damping Factor (8 ohms): 500
Input Sens. / Impedance: 1.0V / 33 kohms
Speaker Impedance 4 ohms minimum
Frequency Response: 4-100kHz (=0.5dB, -3dB)
S/N Ratio (IHF A): 120dB
Power Consumption: 400 watts
Dimensions (W x H x D): 17 1/8 x 4 3/4 x 13 1/8"
Front Panel Height: 4.3”
Weight 22.4 lbs
