|
Company |
Model |
Image (click for more info) |
Description |
|
NAD |
M2 |
 |
Master Series M2 Direct Digital Amplifier
Features
- Direct Digital
Amplifier
- 2 X 250W Continuous
Power at 8 and 4 Ohms
- >500W IHF Dynamic
Power
- <0.004% THD 20Hz –
20kHz from 500mW to 250W
- >120dB Dynamic Range
- 40uV Residual Noise
- >2000 Damping Factor
at 50Hz +0/-0.5dB Frequency Response
20Hz – 20kHz, -3dB >85kHz
- Channel Separation
>90dB @ 1kHz, 80dB @ 10kHz
- Digital PowerDrive
- Digital Soft Clipping
(switchable)
- 5 Position Digital
Impedance Compensation Filter
|
|
NAD |
M3 |
 |
Master Series M3 Dual Mono Integrated Amplifier
- 180 watts X 2, 10Hz - 20kHz, with 0.03THD, both
channels driven into 8 or 4 Ohms
- Dynamic power of 280 watts at 8 Ohms, 480 watts
at 4 Ohms, and 785 watts at 2 Ohms
- PowerDrive
- Dual stage high current/high voltage power
supply
- Dual Mono topology
- Twin NAD Custom-Made "Holmgren" Toroidal
transformer
- Ultra precise multi-stage electronic volume
control using discreet resistors
- 7 inputs, including 1 balanced XLR
- Tape/Zone 2 output (independent source
selection, no volume control)
- Speakers A B with custom 5 way binding posts
- Biamp mode with selectable 40, 60, 80, 100 Hz
crossover frequency on Pre Out 1
- Powered subwoofer
- Main Amp input
|
|
NAD |
M15HD |
 |
NAD M15 HD AV Surround Sound Preamplifier
- 4 Digital HD AV Inputs with HDMI
Repeating
- 4 Analogue AV Inputs with Composite
and S-Video
- 3 HD Component Video Inputs
- 4 Coax and 4 Optical Digital inputs
- 3 Analogue Stereo Inputs
- 7.1 Direct Analogue Input
- Dolby TrueHD, DTS HD Master Audio,
Linear PCM will run at 192kHz; Dolby
Digital Plus, DTS HD High Resolution
Audio, DTS 96/24
- DTS Neo:6 [Cinema/Music], Dolby
ProLogic IIx [Movies/Music], EARS,
Enhanced Stereo
- Audyssey MultEQ Pro
- Video upconversion; Composite and
S-Video inputs available on Component
Video output and HDMI output
- Sigma VXP Image Processing with HD
scaling to 1080p
|
|
NAD |
M25 |
 |
Master Series M25 7-Channel Amplifier Features
- THX Ultra 2 Certified
- 7 X 160 watts Full Disclosure Power, 20Hz -
20kHz, at less than 0.03THD with all channels driven
simultaneously into 8/4 Ohms
- PowerDrive(tm)
- Dynamic power of 220 watts at 8 Ohms, 385 watts
at 4 Ohms, and 485 watts at 2 Ohms
- NAD's Custom-Made "Holmgren" transformer
- NAD Soft Clipping(tm)
- Precision low noise Input Level Controls
- Custom 5 way Binding Post<
- 12V Trigger for advanced control options, 1 in
|
|
NAD |
M56 |
 |
Master Series M56 Blu-ray Disc Player
Features
Blu-ray Disc Features
- Full
support for BD Live Network Connectivity
(Profile 2.0), Picture-in-Picture, Deep
Colour and xvYCC extended colour space.
Media Streaming
-
Expand your home theatre by connecting to
your home network through the built-in Wi-Fi
or ethernet port.
Super Fast Loading
- Stop
waiting to watch your favourite movie with
instant open and only seconds to get
picture, sound, and navigation.
Stunning Video
Performance
-
Supports 1080p/24 video resolution. Even
standard definition DVDs get a boost from
NAD’s upscaling engine with resolution up to
1080p over HDMI.
Studio Master Audio
Performance
-
Onboard decoding for the latest lossless
high bit rate music formats from Dolby
TrueHD and DTS Master Audio 7.1.
Analogue 7.1 Channel
Audio Output
-
Reproduce the latest HD audio formats with
any AV receiver that offers 5.1 or 7.1
input.
|
|
NAD |
T557 |
 |
T 577 Blu-ray Disc Player
Blu-ray Disc
Features
- BD
Live Network Connectivity (Profile 2.0) for
real-time bonus material,
Picture-in-Picture, Deep Colour and xvYCC
extended colour space.
Amazing Video
Performance
-
Supports 1080p resolution at 24 frames per
second. Even standard definition DVDs get a
boost from NAD′s upscaling engine with
resolution up to 1080p over HDMI.
NAD Audio
Performance
-
Onboard decoding for Dolby TrueHD and DTS
Master Audio 7.1. The T 577 sends the
decoded PCM via HDMI. Also, the T 577 also
offers 7.1 analogue outputs.
USB 2.0 Playback
-
Liberate your digital collection of music,
photos, and video with the built in USB
interface.
Details that
Matter
-
Instant Open, fast loading, and last scene
memory all add convenience and ease of use,
so you can enjoy your favourite movie
without frustration.
|
|
NAD |
T747 |
 |
T 747 A/V Surround Sound Receiver
- 7 X 60 watts Simultaneous Full Disclosure Power
- Auto Setup and Calibration of speaker settings
with supplied microphone
- Data Port for use with optional NAD Dock for
iPod
- Dolby TrueHD and DTS HD Master Audio lossless
decoding
- Dolby Digital Plus, ProLogic IIx, DTS HD High
Resolution Audio, Digital Surround 96/24, Neo:6
- EARS surround, Enhanced Stereo, Dolby Virtual
- 5 Custom AV Presets allow instant recall of
unique speaker settings, listening mode, and tone
settings
- AM/FM Tuner with 60 Presets (30 AM and 30 FM
presets)
- Optional DAB (230V) or XM (120V) Tuner Modules
- 4 HDMI Inputs with Repeater Function
- Analogue Video Inputs are converted to digital
HDMI Output
- SD signals are converted to HD up to 1080p with
onboard Faroudja DCDi Processing
|
|
NAD |
T765HD |
 |
T 765 A/V Surround Sound Receiver
- 7 x 80W Simultaneous Full Disclosure Power
- 7 x 140W Minimum Continuous Power (FTC)
- PowerDrive™ amplifier technology
- Holmgren™ Toroidal Power Supply
- Modular construction for simple upgrade and service
- Audyssey Auto Setup and Calibration of all speaker
settings using supplied microphone
- Data Port for use with optional NAD IPD 1 Dock for
iPod®
- Dolby Digital, Dolby Digital EX, ProLogic II,
ProLogic IIx, DTS, DTS ES, DTS 24/96, DTS NEO:6, EARS
and Stereo Enhanced Surround Modes
- 5 A/V Custom Presets store unique listening modes,
DSP options, tone, speaker and display settings
- Direct speaker level adjustment for surround, centre
and sub
- NAD Soft Clipping™
- Burr-Brown 24 bit 96kHz A/D converter
- Burr-Brown 24 bit 192kHz Stereo D/A converters (x5)
- Texas Instruments Aureus™ 7.1 DSP (32 bit dual core
floating point design)
- 3 1080p HDMI Video Inputs switch to 1 Output, freely
assignable
- Cross Conversion of all analogue video formats
- 7 Analogue Stereo Audio Inputs (1 front panel)
- Media Player MP front panel input
- 6 Analogue Video Inputs, all S-Video and Composite
(1 front panel), 3 Component Video
- 7 Digital Audio Inputs, 3 Coax and 4 Optical (1
front panel)
- 3 Analogue Stereo Audio Outputs, 2 assignable as
Tape Out, or as Zone 3 and Zone 4 Outputs with
independent source and volume control
- Back Surround Amplifier Channels can be reassigned
for Zone 2 or front Bi-Amp
|
|
NAD |
T775HD |
 |
NAD T775 A/V Surround Sound Receiver
- Full MDC upgrade to latest HD standard.
- 7 x 100W Simultaneous Full Disclosure Power
- 7 x 180W Minimum Continuous Power (FTC)
- PowerDrive™ amplifier technology
- Holmgren™ Toroidal Power Supply
- Modular construction for simple upgrade and
service
- Audyssey Auto Setup and Calibration of all
speaker settings using supplied microphone
- Audyssey MultEQ XT Room Correction with custom
NAD developed target response curves
|
|
PSB |
Synchrony
One |
|
|
Frequency Range |
| On Axis @ 0° ±1.5dB |
33–20,000 Hz |
| On Axis @ 0° ±3dB |
30–23,000 Hz |
| Off Axis @ 30° ±3dB |
33–10,000 Hz |
| Lf Cutoff -10dB |
24 Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
88 dB |
| Typical Listening
Room |
90 dB |
|
Impedence |
| Nominal |
4 Ohms |
| Minimum |
4 Ohmns |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
20–300 Watts |
| Program |
300 Watts |
|
Acoustic Design |
| Tweeter (Nominal) |
1″ (25 mm)
Titanium Dome with Ferrofluid |
| Midrange (Nominal) |
4″ (102 mm)
Fine weave fiberglass
Natural fiber cone
Rubber Surround |
| Woofer (Nominal) |
3 x 6½″ (165 mm)
Fine weave fiberglass
Natural fiber cone
Rubber Surround |
| Crossover |
2,200 Hz, LR4, 500Hz |
| Internal Volume
Design Type |
2.35 cu ft (67 litres)
Bass Reflex |
|
|
PSB |
Synchrony
Two |
 |
Synchrony Two Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
36–20,000 Hz |
| On Axis @ 0° ±3dB |
36–23,000 Hz |
| Off Axis @ 30° ±3dB |
36–10,000 Hz |
| Lf Cutoff -10dB |
29 Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
88 dB |
| Typical Listening Room |
90 dB |
| Impedence |
| Nominal |
4 Ohms |
| Minimum |
4 Ohmns |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
20–300 Watts |
| Program |
300 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1″ (25 mm)
Titanium Dome with Ferrofluid |
| Woofer (Nominal) |
3 x 5¼ (135 mm)
Fine weave fiberglass
Natural fiber cone
Rubber Surround |
| Crossover |
2,200 Hz, LR4 |
| Internal Volume Design Type |
1.8 cu ft (51 litres)
Bass Reflex |
|
|
PSB |
Synchrony
Two B |
 |
Synchrony Two B Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
50–20,000 Hz |
| On Axis @ 0° ±3dB |
50–23,000 Hz |
| Off Axis @ 30° ±3dB |
50–10,000 Hz |
| Lf Cutoff -10dB |
40 Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
86 dB |
| Typical Listening Room |
88 dB |
| Impedence |
| Nominal |
4 Ohms |
| Minimum |
4 Ohmns |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
15–150 Watts |
| Program |
150 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1″ (25 mm)
Titanium Dome with Ferrofluid |
| Woofer (Nominal) |
5¼″ (135 mm)
Fine weave fiberglass
Natural fiber cone
Rubber Surround |
| Crossover |
2,200 Hz, LR4 |
| Internal Volume Design Type |
0.6 cu ft (17 litres)
Bass Reflex |
|
|
PSB |
Synchrony
Two C |
 |
Synchrony Two C Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
55–20,000 Hz |
| On Axis @ 0° ±3dB |
55–23,000 Hz |
| Off Axis @ 30° ±3dB |
55–10,000 Hz |
| Lf Cutoff -10dB |
49 Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
87 dB |
| Typical Listening Room |
89 Db |
| Impedence |
| Nominal |
4 Ohms |
| Minimum |
4 Ohmns |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
15–200 Watts |
| Program |
200 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1″ (25 mm)
Titanium Dome with Ferrofluid |
| Woofer (Nominal) |
2 x 5¼″ (135 mm)
Fine weave fiberglass
Natural fiber cone
Rubber Surround |
| Crossover |
2,200 Hz, LR4 |
| Internal Volume Design Type |
0.9 cu ft (26 litres)
Bass Reflex |
|
|
PSB |
Imagine B |
 |
Imagine B Bookshelf Specifications
Frequency Range
On Axis @ 0° ±1.5dB 55-20,000Hz
On Axis @ 0° ±3dB 52-23,000Hz
Off Axis @ 30° ±1.5dB 55-10,000Hz
Lf Cutoff -10dB 48Hz
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink Noise, C-weighted
Anechoic Chamber 87dB
Typical Listening Room 89dB
Impedence
Nominal 4 Ohms
Minimum 4 Ohms
Input Power
RMS, Clipping < 10% of the Time
Recommended 20-150 Watts
Program 150 Watts
Acoustic Design
Tweeter (Nominal) 1" (25mm)
Titanium Dome with Ferrofluid
Woofer (Nominal) 5 1/4" (135mm) Woofer
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround
Crossover 1,800HZ, LR4
Internal Volume Design Type .27 cu ft (7.7 liter)
Bass Reflex
Size (W x H x D)
Millimeters 191mm x 330mm x 305mm Inches 7 1/2" x 13” x 12"
Net Weight
Kilograms 7.8 kg/each Pounds 17.2 lb /each
Shipping Weight
Kilograms 17.3 kg /pair Pounds 38 lb /pair
Finish
Black Ash or Dark Cherry Wood Veneer |
|
PSB |
Imagine T |
 |
Imagine T Tower Specifications
Frequency Range
On Axis @ 0° ±1.5dB 42-20,000Hz
On Axis @ 0° ±3dB 38-23,000Hz
Off Axis @ 30° ±1.5dB 42-10,000Hz
Lf Cutoff -10dB 35Hz
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink Noise, C-weighted
Anechoic Chamber 88dB
Typical Listening Room 90dB
Impedence
Nominal 4 Ohms
Minimum 4 Ohms
Input Power
RMS, Clipping < 10% of the Time
Recommended 20-200 Watts
Program 200 Watts
Acoustic Design
Tweeter (Nominal) 1" (25mm)
Titanium Dome with Ferrofluid
Woofer (Nominal) 2 x 5 1/4" (135mm) Woofers
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround
Crossover 1,800HZ, LR4,800Hz
Internal Volume Design Type 1.0 cu ft (29 liter)
Dual Port Bass Reflex
Size (W x H x D)
Millimeters 210mm x 945mm x 346mm Inches 8 1/4" x 37 3/16" x 13 5/8"
Net Weight
Kilograms 18.5 kg /each Pounds 40.6 lb /each
Shipping Weight
Kilograms 23.6kg /each Pounds 52 lb /each
Finish
Black Ash or Dark Cherry Wood Veneer |
|
PSB |
Image T5 |
 |
Image T5 Tower Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
48-20,000Hz |
| On Axis @ 0° ±3dB |
35-23,000Hz |
| Off Axis @ 30° ±1.5dB |
48-10,000Hz |
| Lf Cutoff -10dB |
30Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
88dB |
| Typical Listening Room |
90dB |
| Impedence |
| Nominal |
6 Ohms |
| Minimum |
4 Ohms |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
20 - 200 Watts |
| Program |
200 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1” (25mm)
Titanium Dome with
Ferrofluid Neodymium Magnet |
| Woofer (Nominal) |
2 x 5 1/4” (133mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround |
| Crossover |
1,800Hz, LR4, 800Hz |
| Internal Volume Design Type |
1.42 cu ft (40.2L)
Bass Reflex |
|
|
PSB |
Image T6 |
 |
Image T6 Tower Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
45-20,000Hz |
| On Axis @ 0° ±3dB |
32-23,000Hz |
| Off Axis @ 30° ±1.5dB |
45-10,000Hz |
| Lf Cutoff -10dB |
28Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
89dB |
| Typical Listening Room |
91dB |
| Impedence |
| Nominal |
6 Ohms |
| Minimum |
4 Ohms |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
20 - 200 Watts |
| Program |
200 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1” (25mm)
Titanium Dome with
Ferrofluid Neodymium Magnet |
| Midrange (Nominal) |
5 1/4” (133mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround |
| Woofer (Nominal) |
2 x 6 1/2” (165mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround |
| Crossover |
2,200Hz, LR4, 500Hz, B3 |
| Internal Volume Design Type |
1.93 cu ft (54.7L)
Sealed Mid-Range Chamber Dual Port Bass
Reflex |
|
|
PSB |
Image B4 |
 |
Image B4 Compact Bookshelf Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
70-20,000Hz |
| On Axis @ 0° ±3dB |
60-23,000Hz |
| Off Axis @ 30° ±1.5dB |
70-10,000Hz |
| Lf Cutoff -10dB |
55Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
85dB |
| Typical Listening Room |
87dB |
| Impedence |
| Nominal |
6 Ohms |
| Minimum |
4 Ohms |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
10 - 80 Watts |
| Program |
60 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1” (25mm)
Titanium Dome with
Ferrofluid Neodymium Magnet |
| Woofer (Nominal) |
4” (102mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround |
| Crossover |
2,200Hz, LR4 |
| Internal Volume Design Type |
0.11 cu ft (3.1L)
Bass Reflex |
|
|
PSB |
Image B5 |
 |
Image B5 Bookshelf Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
70-20,000Hz |
| On Axis @ 0° ±3dB |
50-23,000Hz |
| Off Axis @ 30° ±1.5dB |
70-10,000Hz |
| Lf Cutoff -10dB |
50Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
87dB |
| Typical Listening Room |
89dB |
| Impedence |
| Nominal |
6 Ohms |
| Minimum |
4 Ohms |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
20 - 150 Watts |
| Program |
150 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1” (25mm)
Titanium Dome with
Ferrofluid Neodymium Magnet |
| Woofer (Nominal) |
5 1/4” (133mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround |
| Crossover |
1,800Hz, LR4 |
| Internal Volume Design Type |
0.32 cu ft (9.1L)
Bass Reflex |
|
|
PSB |
Image B6 |
 |
Image B6 Bookshelf Specifications
| Frequency Range |
| On Axis @ 0° ±1.5dB |
59-20,000Hz |
| On Axis @ 0° ±3dB |
45-23,000Hz |
| Off Axis @ 30° ±1.5dB |
59-10,000Hz |
| Lf Cutoff -10dB |
40Hz |
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink
Noise, C-weighted |
| Anechoic Chamber |
89dB |
| Typical Listening Room |
90dB |
| Impedence |
| Nominal |
6 Ohms |
| Minimum |
4 Ohms |
Input Power
RMS, Clipping < 10% of the Time |
| Recommended |
20 - 150 Watts |
| Program |
150 Watts |
| Acoustic Design |
| Tweeter (Nominal) |
1” (25mm)
Titanium Dome with
Ferrofluid Neodymium Magnet |
| Woofer (Nominal) |
6 1/2” (165mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround |
| Crossover |
1,800Hz, LR4 |
| Internal Volume Design Type |
0.48 cu ft (13.6L)
Bass Reflex |
|
|
PSB |
SubSeries 500 |
 |
SubSeries 500 Subwoofer Specifications
Frequency Range
On Axis @ 0° ±3dB 25-150Hz
Lf Cutoff -10dB 22 Hz
Impedence
Nominal 120V, 60Hz | 220-240V, 50/60 Hz
Amplifier Power
Continuous 500W
Dynamic 750W
Dynamic Peak 1500W
Design Class H Discrete MOSFET Output Devices
Acoustic Design
Woofer (Nominal) 12” (300 mm)
Woven Fiber Glass Cone Rubber Surround
2” (50mm) Voice Coil
80oz (2268g) Magnet Cast Basket
Crossover Variable 50Hz-150Hz
24dB/octave Linkwitz-Riley
Low Pass Filter
Internal Volume Design Type 2.34
Bass Reflex 2 x 2 3/4”(70mm) Down Firing Ports
Radiussed Externally and Internally
Size (W x H x D)
Millimeters 391mm x 584mm x 535mm Inches 15 7/8” x 23 3/16” x 21 1/16”
Net Weight
Kilograms 32.5 kg/each Pounds 71.6lb /each
Shipping Weight
Kilograms 37.5 kg/each Pounds 82.6lb /each
Finish
Black and Cherry wood Veneer
Features
Front Mounted Volume, Crossover,
Continuous Variable Phase Controls Power LED
Auto on/off, LFE in/out,
LL Stereo in/out, HL Stereo in,
12V Trigger, Vibration absorbing feet,
Gold-plated RCA Inputs/Outputs
High/Speaker Level Gold-plated
5-way Binding Post Inputs |
|
PSB |
SubSeries HD 10 |
 |
SubSeries HD10 Specifications
Frequency Range
On Axis @ 0° ±3dB 30-150Hz
Lf Cutoff -10dB 28 Hz
Amplifier Power
Continuous 750 Watts
Dynamic 1000 Watts
Dynamic Peak 2000 Watts
Acoustic Design
Woofer (Nominal) 1 x 10” Poly-coated Fiber Cone
High Density Rubber Surround
2 x 10” Passive Radiator
Crossover Variable 50-150Hz, LR4
Low Pass Filter
Internal Volume Design Type Passive Radiator
Size (W x H x D)
Millimeters 305 x 305 x 305 Inches 12 x 12 x 12"
Net Weight
Kilograms 17.2 kg/each Pounds 38.0 lb /each
Shipping Weight
Kilograms 20.4 kg/each Pounds 45.0 lb /each
Finish
Satin Black
Features
Rear mounted volume,
crossover & phase switch,
Auto on/off, LFE input, 12V Trigger |
